|
| |
 |
 |
Product P/N： MXD0320
Intro： |
1.
Overview
MXD0320 is a demodulator fully compliants with China Digital Television Terrestrial Broadcasting (GB20600-2006) standard, including both the single-carrier mode and multi-carrier mode. It can totally support 330 modes defined in GB20600-2006. MXD0320 can be integrated into mobile phone, USB dongle or other handheld systems.
2. Features
· Fully compliant China Digital TV Terrestrial Broadcasting System Standard (GB20600-2006)
· Support single and multi carrier receiver solution
· Support dual modes: C = 1, C = 3780
· Modulation modes: 4QAM-NR, 4QAM, 16QAM, 32QAM, 64QAM
· FEC Coding Rate: 0.4, 0.6, 0.8
· Symbol de-interleave : none, 240, 720
· Guard Interval: 420 (fixed/rotate phase), 595, 945 (fixed/rotate phase)
· Automatic transmission mode detection and synchronization
· Integrated low power dual-channel 10-bit ADC and SDRAM
· Support of ZIF, LIF (8.192MHz) and IF (36MHz) input from tuner
· I2C master and PWM AGC for tuner control
· Flexible host interfaces including MPEG2-TS serial/parallel and I2C
· High performance: -97dBm sensitivity
· Fast TPS acquisition: < 100ms
· Ultra compact package: 80 balls BGA(7mm x 7mm)
· Low power consumption: < 200mW (including ADC and SDRAM)
· Excellent ability to resist multi-path interference and Doppler effect
|
|
Product P/N： MXD1320
Intro： |
1.
Overview
MXD1320 is a demodulator fully compliants with China Digital Television Terrestrial Broadcasting (GB20600-2006) standard, including both the single-carrier mode and multi-carrier mode. It can totally support 330 modes defined in GB20600-2006. MXD1320 can be integrated into Set-Top Box or iDTV set.
2. Features
· Fully compliant China Digital TV Terrestrial Broadcasting System Standard (GB20600-2006)
· Support single and multi carrier receiver solution
· Support dual modes: C = 1, C = 3780
· Modulation modes: 4QAM-NR, 4QAM, 16QAM, 32QAM, 64QAM
· FEC Coding Rate: 0.4, 0.6, 0.8
· Symbol de-interleave : none, 240, 720
· Guard Interval: 420 (fixed/rotate phase), 595, 945 (fixed/rotate phase)
· Automatic transmission mode detection and synchronization
· Integrated low power dual-channel 10-bit ADC
· Support of ZIF, LIF (8.192MHz) and IF (36MHz) input from tuner
· I2C master and PWM AGC for tuner control
· Flexible host interfaces including MPEG2-TS serial/parallel and I2C
· High performance: -97dBm sensitivity
· Fast TPS acquisition: < 100ms
· Ultra compact package: 128 pins LQFP(14mm x 14mm x 1.4mm)
· Low power consumption: < 150mW (including ADC)
· Excellent ability to resist multi-path interference and Doppler effect
|
|
Product P/N： MXD0120
Intro： |
1.
Overview
The MXD0120 is a mobile digital TV demodulator chip designed for the DAB, DAB+, T-DMB and DAB-IP applications. The MXD0120 can be used in DAB/DAB+/T-DMB/DAB-IP receivers including portable multimedia player, PDA, mobile phone, automobile entertainment system, PC add-on cards, USB dongle, and digital camera. It is best suited for mobile application with low power consumption and small foot-print requirements.
2. Features
· Fully compliant with ETSI EN 300 401 (DAB), ETSI TS 102 427/428 (DMB), GY/T 214-2006 and ETSI TS 102 563 (DAB+).
· Support of all DAB transmission modes (I, II, III, and IV)
· Automatic mode detection and frame synchronization.
· Integrated low power dual-channel 10-bit ADC.
· Integrated outer decoder, including the outer de-interleaver and Reed-Solomon decoder, required for T-DMB and DAB+ service.
· Support of dynamic multiplex re-configuration.
· TII (Transmitter Identification Information) decoding capability.
· Robust reception with effective frequency/timing synchronization and offset compensation algorithm.
· Dual-channel simultaneous demodulation with each channel carries any of the audio, video and packet data.
· Fast channel acquisition (< 200 ms).
· Embedded SRAM supporting full channel capacity decoding corresponding to 1.8 Mbps data rate.
· Buffered outputs reducing the transaction frequency and host load.
· Support of zero-IF (I/Q), low IF (1.024/2.048 MHz) and IF (38.912 MHz) input from tuner.
· Support up to ±192 KHz frequency offset correction.
· I2C master, PWM AGC and power cycling signals for tuner control.
· Flexible host interfaces including SPI, SDIO, MPEG2 TS serial and I2C.
· 24.576 MHz input clock.
· 1.2V (core) and 1.8-3.3V (I/O) supply voltages.
· Extremely compact 5x5 mm2 BGA package with 65 balls.
· Low power consumption, (Only 17mW when full capacity reception)
|
|
| |
|
|
